external ac/dc power supplies 20 w external ac/dc power supplies 1 2 year warranty ssl20c series single output external power supply ? 4.65 x 2.40 x 1.08 inch enclosure ? 20 w continuous external power supply ? molded ul94v-0 plastic enclosure ? overvoltage and short circuit protection ? en55022, fcc conducted and radiated emissions level b ? ul, csa, vde and ce safety approvals ? a vailable rohs compliant the ssl20c series is a 20 w universal input ac/dc external class ii power supply in a 4.65 x 2.40 x 1.08 inch plastic enclosure. the ssl20c represents the next generation of low cost external power supplies, suitable for a host of worldwide low power external power applications. the ssl20c provides up to 20 w under natural convection cooling. standard features include universal ac input, overvoltage and short circuit protection and meets en55022 level b for conducted emissions. the ssl20c has several output voltages available ranging from 5 v to 48 v. the series has full international safety approvals and carries the ce mark to provide pre-approved selv outputs. all specifications are typical at nominal input, full load at 25 c unless otherwise stated output specifications t otal regulation main output 5.0% (see note 3) line, load and temperature co-efficient overshoot/undershoot less than 10ms 10% t ransient response main output 5.0% of nominal 70% to 100% voltage full load step overvoltage protection auto-recovery 140% nominal (see note 5) short circuit protection continuous with auto-recovery minimum output current 0 a input specifications input voltage range universal input 90-264 vac input frequency range 47-63 hz input current 90 vac 0.6 arms max. 264 vac 0.3 arms max. emc characteristics radiated emissions en55022, fcc level b conducted emissions en55022, fcc level b specifications international safety standard approvals vde0805/en60950/iec950 file no. 129739g ul1950 file no. e136005 csa c22.2 no. 950 file no. lr41062 geprfte sicherhelt general specifications hold-up time 115 vac @ full load 10 ms efficiency 115 vac @ full load 70% typ. 5 v models only 65% typ. isolation voltage input/output 3000 vac switching frequency fixed 72 khz, typ. approvals and en60950, iec950, ul1950 standards (see note 4) csa c22.2 no. 950 case material general electric lexan, black flammability rating ul94v-0 w eight 200 g (7 oz) mtbf mil-hdbk-217f >150,000 hours @ 25 c environmental specifications thermal performance operating, full load 0 c to +40 c non-operating C40 c to +85 c 0 c to +40 c ambient, full load convection cooled relative humidity 5% to 95% rh altitude operating 10,000 feet max. non-operating 30,000 feet max. v ibration (see note 6) 5-500 hz 2.4 g (approx.) shock per mil-std-810e 516.4 part iv file name: ssl20c.pdf rev (03): 07 nov 2005
datasheet ? artesyn technologies ? 2005 the information and specifications contained in this datasheet are believed to be correct at time of publication. however, arte syn technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. the information and specifications contained or described herein are subject to change in any manner at any time without notice. no rights under any patent accompany the sale of any such product(s) or information contained herein. for the most current data and application support visit www.artesyn.com/powergroup/products.htm notes 1 peak output current lasting less than 3 seconds and non repetitive. during peak loading output voltage may exceed total regulation limits. 2 20 mhz bandwidth, peak to peak, measured using 0.1 f ceramic capacitor in parallel with a 10 f tantalum capacitor at the point of output load. 3 t otal regulation is defined as the static output regulation at 25 c, including initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factory settings. 4 to help maintain the power supply safety approvals, the iec320/c7 input connector cable must be rated minimum 3.0 a and approved by an applicable safety agency for the intended country of use. national and international variations on mains plugs, adapters and customer preference to lead length prevents artesyn from supplying an iec320/c7 (or compatible) input connector cable. the iec320/c7 input (or compatible) connector cable can be sourced locally, e.g. newark, qual electronics, radio shack, etc. or other non affiliated distributors. 5 this feature protects output circuitry from output overvoltage caused by internal psu failure. 6 the j suffix indicates that these parts are pb-free (rohs 6/6) compliant. tse rohs 5/6 (non pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 7 notice: some models do not support all options. please contact your local artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. ssl20c series single output external power supply external ac/dc power supplies 20 w external ac/dc power supplies 2 www.artesyn.com output output currents ripple (2) total ovp model voltage min max peak (1) regulation (3) (max) number (6.7) +5 v 0 a 4.0 a 4.80 a 50 mv 4.75-5.25 v 7 v SSL20C-7605J +12 v 0 a 1.67 a 2.00 a 120 mv 11.4-12.6 v 16.8 v ssl20c-7612j +15 v 0 a 1.34 a 1.60 a 150 mv 14.25-15.75 v 21 v ssl20c-7615j +18 v 0 a 1.11 a 1.33 a 180 mv 17.1-18.9 v 25.2 v ssl20c-7618j +24 v 0 a 0.83 a 1.00 a 240 mv 22.8-25.2 v 33.6 v ssl20c-7624j +48 v 0 a 0.42 a 0.50 a 300 mv 45.6-50.4 v 64 v ssl20c-7617j single output pin connections 2.5 mm jack plug inner v a switchcraft power outer return jack, p/n 712a or equiv. input connector iec 320 two pins c8 type rated at 2.5 a, 250 vac file name: ssl20c.pdf rev (03): 07 nov 2005 cable length 36.00 0.79 [914.0 20 ] 0.098 [2.50] 4.646 0.02 [118.0 0.5] all dimensions in inches [mm] 2.402 0.02 [61.0 0.5] 1.083 +0.024 -0.000 27.5 +0.6 -0.0 2.5 mm phone jack
|
